Rms-technologies R325P DRIVER Manual de usuario descargar pdf (Pagina 12)

Communicating with the R325PE

Step 1: Move all dipswitches to the OFF position. Place jumper on Pins 1 & 2.

Inage 6.3

1. Connect P1 to PC via RS485-232 Converter Card or USB485 Converter Card.

2. Set up HyperTerminal by selecting correct COM port

3. Settings for HyperTerminal is as follows: 57600, 8 bits, None, 1, None

4. The R325P Driver only version allows for changing the hold timeout settings, the amount of mixed

decay, and to check the firmware revision level.

RS485-232 Converter Card

Figure 6.2

Move ALL

dipswitches

to the OFF

Position

Jumper is

placed

closest to

the LED.

RMS Technologies Page 12 Version 1.01

R325PE Single Axis Closed loop Driver/Indexer Manual 5/29/2013

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 29 30

Sin comentarios

Rms-technologies R325P DRIVER Manual de usuario Pagina 12