Rms-technologies IMD23 W/ POLE DAMPING TECHNOLOGY Manual de usuario descargar pdf (Pagina 6)

RMS Technologies Page 6 Version 1.10

IMD23/23DE Manual 12/3/2007

2 ELECTRICAL SPECIFICATIONS

Power Supply Requirements

Voltage +12 VDC to 48 VDC

Driver

Peak Current: 0.3 to 3.0 Amps

Motor Specifications

NEMA Size 23

Holding Torque:

IMD23-S-XX 100 oz-in

IMD23-M-XX 182 oz-in

IMD23-L-XX 294 oz-in

Steps per Revolution (1.8° Motor)

400, 800, 1600, 3200, 6400, 12800, 25600, 51200

I/O Specifications

3x Optically Isolated Inputs

* The IMD23 can handle a 24VDC and 3 Amp system OR a 48VDC and 2 Amp

system

3 OPERATING SPECIFICATIONS

Maximum Step Frequency: 2.5 MHz

Operating Temperature*: Low end – 0° C

High end – Dependent on case temperature,

bottom of unit must not exceed 45° C

100% duty cycle is OK as long as the bottom of the unit does not exceed 45°C (the bottom

is the flat side of the unit, opposite the mounting & shaft).

* RMS Technologies integrated motor and drive products are designed and fully tested to withstand the rated

operating temperature ranges at 24VDC and 3 Amp Peak, or 48VDC and 2 Amp Peak.

Logic Timing

Minimum Step Pulse Width 200 nanoseconds

Minimum Step Low Time 200 nanoseconds

Maximum Power-Down Recovery Time 20 milliseconds

1 2 3 4 5 6 7 8 9 10 11 ... 22 23

Sin comentarios

Rms-technologies IMD23 W/ POLE DAMPING TECHNOLOGY Manual de usuario Pagina 6